Tekon PLUS wireless 4..20mA / 0..10V signal transmission solution

February 21, 2019

The PLUS Wireless System was designed to monitor 4.20 mA / 0..10V signals for secure communication without complicated wiring.

Practically every industrial control system has remote measuring points. To ensure remote signal transmission from your process sensors and avoid cable installation and related costs, we recommend using the TekOn series of products.

This will be an ideal solution for places where cable installation from measurement point to control divide is impossible or difficult. As well as mobile objects or production facilities where cable installation is impractical.

This system consists of a transmitter, a receiver and, if necessary, a repeater. The receiver can be connected to PLC, SCADA, PC, HMI or one of the indicators using 8x analogue output or MODBUS RTU communication. The PLUS Wireless System was designed to monitor 4.20 mA / 0..10V signals for secure communication and signal transmission in an industrial environment.

Examples of Process Sensors:

Conductivity,
PH,
vibration,
moisture,
stream,
level,
pressure,
temperature,
etc.

Advantages:

4 configurable analog inputs (0.20 mA or 0.10 V)
3 configurable digital outputs: generic, RF link lost and external power control,
Configurable communication period and / or event trigger using digital input
Up to 4 km of communication distance (LoS) with 868 MHz and 128 bit AES encryption
Multi-hop network with self-optimizing, self-optimizing features
Internal temperature, battery voltage, and wireless quality (RSSI) monitoring,
Operating temperature range -30ºC to 80ºC and IP65 protection
Simple and intuitive USB configuration via Tekon Configurator (free software)
Maximum devices (one receiver) 55 pcs, 220 sensors
Frequency of communication from 1 ... 43200 s
Resolution 0.96uA (15bit)
Power 5 to 24V DC ± 5%

At ZTF LASMA are available product test equipment so you can make sure the system is working under real working conditions. Contact us to learn more and agree on test options.

We also remind you of the TekOn Wireless Tepper System ONE, which enables wireless transmission of temperature data from different types of temperature sensors, such as RTD (Pt100, Pt1000, etc.), Thermocouples: (E, J, K, N, R, S, T). See the appendix for information on this solution.

Products

Bezvadu temperatūras raidītājs THUW1103HP Tekon