Due to the fact that we often come to situations where safe and efficient heating element control is required - maintaining a constant temperature in the room / chamber, etc., an efficient and safe solution is sought. Our partner Autonics offers a suitable, accurate series of equipment - SPC1.
In this case, we recommend using e.g. 35A or 55A SSR switch / controller depending on the required load. One of the priorities is that the relay is controlled by a 4-20mA signal, which allows connection to a PLC controller or Pixsys controller, as well as the use of DC 1-5V and potentiometer control. Control is considerable - for example "Cycle control (Zero cross turn on)". A separate fan is not required for radiator ventilation. The relay itself is attached to the mounting plate with two screws.
When using 4-20mA or 1-5V and Cycle control (zero cross turn-on), ON / OFF operation takes place at the AC zero point, thus no network interference occurs
We remind you that Autonics is one of the top manufacturers in Korea that stands out with its solutions, product quality and price.
Advantages and technical parameters:
If you need a temperature or other physical size monitoring system, contact ZTF Lāsma specialists who will help you find the most suitable and cost-effective solution. We are here to support!
